Trial Group

Public·25 students

May 20, 2023

Ccm Bicycle Computer User Manual

How to Use Your Ccm Bicycle Computer: A Complete Guide

If you are a cyclist who wants to track your speed, distance, time, calories and carbon dioxide savings, then you might want to invest in a Ccm Bicycle Computer. This device is a user-friendly and reliable gadget that can help you improve your performance and enjoy your rides more. But how do you use it? In this article, we will show you how to set up, operate and maintain your Ccm Bicycle Computer.

Ccm Bicycle Computer User Manual

Download Zip

What is a Ccm Bicycle Computer?

A Ccm Bicycle Computer is a device that attaches to your bike and measures various data related to your cycling activity. It has a display screen that shows you the current speed, average speed, maximum speed, trip distance, total distance, trip time, clock, calories burned and carbon dioxide saved. It also has two buttons that allow you to switch between modes and functions.

How to Mount Your Ccm Bicycle Computer?

To mount your Ccm Bicycle Computer, you will need the following parts:

Bicycle computer bracket

Bicycle computer

Sensor

Magnet

Cable ties

Follow these steps to mount your Ccm Bicycle Computer:

Attach the bicycle computer bracket to the handlebar using the cable ties. Make sure the bracket is secure and stable.

Slide the bicycle computer into the bracket until it clicks into place.

Attach the sensor to the front fork using the cable ties. Make sure the sensor is aligned with the center of the wheel and facing the magnet.

Attach the magnet to a spoke of the front wheel using the cable ties. Make sure the magnet is close to the sensor (about 3 mm) and facing it.

Connect the sensor cable to the bicycle computer bracket. Make sure the cable is not too loose or too tight.

How to Set Up Your Ccm Bicycle Computer?

To set up your Ccm Bicycle Computer, you will need to do the following:

Activate the bicycle computer by pressing any button.

Set the wheel size by pressing and holding both buttons for 3 seconds. The display will show "WS". Use the left button to select your wheel size (from 10" to 29") and use the right button to confirm.

Select kilometres or miles by pressing and holding both buttons for 3 seconds. The display will show "KM" or "M". Use the left button to toggle between them and use the right button to confirm.

Set your age and weight by pressing and holding both buttons for 3 seconds. The display will show "AGE". Use the left button to adjust your age (from 10 to 99) and use the right button to confirm. Then, the display will show "WEI". Use the left button to adjust your weight (from 20 to 150 kg or from 44 to 330 lb) and use the right button to confirm.

Set the carbon dioxide saving in comparison with a car by pressing and holding both buttons for 3 seconds. The display will show "CO". Use the left button to adjust the value (from 0.1 to 9.9 kg/km or from 0.1 to 15.9 lb/mile) and use the right button to confirm.

Set the 12/24 hour display by pressing and holding both buttons for 3 seconds. The display will show "12H" or "24H". Use the left button to toggle between them and use the right button to confirm.

Set the clock by pressing and holding both buttons for 3 seconds. The display will show "HOUR". Use the left button to adjust the hour (from 0 to 23) and use the right button to confirm. Then, the display will show "MIN". Use

How to Use Your Ccm Bicycle Computer?

To use your Ccm Bicycle Computer, you will need to do the following:

Turn on the bicycle computer by pressing any button. The display will show the current speed.

Press the left button to switch between the modes: DST (trip distance), TM (trip time), AVS (average speed), MXS (maximum speed), CAL (calories burned) and CO (carbon dioxide saved).

Press the right button to switch between the functions: ODO (total distance), CLK (clock) and SCAN (automatic cycle through all modes).

To reset the route data (DST, TM, AVS) to zero, press and hold the left button for 3 seconds in any mode.

To reset the maximum speed (MXS) or the calories (CAL) to zero, press and hold the right button for 3 seconds in the corresponding mode.

To manually input the total kilometres or miles, press and hold both buttons for 3 seconds in ODO function. The display will show "ODO". Use the left button to adjust the value and use the right button to confirm.

To manually input the previous carbon dioxide saving with a car, press and hold both buttons for 3 seconds in CO function. The display will show "CO". Use the left button to adjust the value and use the right button to confirm.

How to Maintain Your Ccm Bicycle Computer?

To maintain your Ccm Bicycle Computer, you will need to do the following:

Change the battery when the display becomes dim or blank. The battery type is CR2032. To change the battery, remove the bicycle computer from the bracket and open the battery compartment on the back. Replace the old battery with a new one and close the battery compartment. Make sure the polarity is correct.

Clean and care for your bicycle computer with a soft cloth. Do not use any abrasive or corrosive materials. Do not immerse your bicycle computer in water or expose it to extreme heat or cold.

Store your bicycle computer in a dry and cool place when not in use. Avoid direct sunlight and high humidity.

Conclusion

A Ccm Bicycle Computer is a useful device that can help you monitor your cycling activity and improve your performance. It is easy to mount, set up and use. It also has various modes and functions that can provide you with valuable information. By following this guide, you can enjoy your Ccm Bicycle Computer for a long time.