Ccd S820 Manual
DOWNLOAD https://urlin.us/2tBuHC
Ccd S820 Manual
How to Use the CCD S820 Keychain Camera with Motion Detection and Night Vision
The CCD S820 is a covert spy camera that looks like a car key fob. It can record high-definition video and audio, take photos, and support motion detection and night vision modes. It also has a built-in rechargeable battery and a microSD card slot for storage. In this article, we will show you how to use the CCD S820 keychain camera with its manual.
What's in the Box
The CCD S820 keychain camera comes with the following items:
The camera itself
A USB cable for charging and data transfer
A user manual
How to Charge the Camera
Before using the camera, you need to charge it fully. To do so, follow these steps:
Connect the USB cable to the camera's micro USB port, which is located on the side of the camera.
Connect the other end of the USB cable to a computer or a power adapter.
The red LED light on the camera will turn on, indicating that the camera is charging.
When the red LED light turns off, the camera is fully charged.
Disconnect the USB cable from the camera and the power source.
How to Insert a MicroSD Card
The CCD S820 keychain camera supports microSD cards up to 32GB. To insert a microSD card, follow these steps:
Open the cover on the side of the camera, which is next to the micro USB port.
Insert the microSD card into the slot with the metal contacts facing down.
Push the microSD card until it clicks into place.
Close the cover on the side of the camera.
How to Turn On/Off the Camera
To turn on the camera, press and hold the power button for about 3 seconds. The blue LED light will flash once, indicating that the camera is on. To turn off the camera, press and hold the power button for about 6 seconds. The blue LED light will flash three times, indicating that the camera is off.
How to Record Video
The CCD S820 keychain camera can record video in two resolutions: 1080p (1920x1080) and 720p (1280x720). To record video, follow these steps:
Turn on the camera.
Press the video button once. The blue LED light will flash once, indicating that the video recording has started.
To stop recording, press the video button again. The blue LED light will flash three times, indicating that the video recording has stopped and saved.
To change the video resolution, follow these steps:
Turn off the camera.
Press and hold both the power button and the video button for about 6 seconds. The blue LED light will flash once for 1080p mode or twice for 720p mode.
Release both buttons. The camera will turn on with the selected resolution.
How to Take Photos
The CCD S820 keychain camera can take photos with a resolution of 4032x3024. To take photos, follow these steps:
Turn on the camera.
Press the photo button once. The blue LED light will flash once, indicating that a photo has been taken and saved.
How to Use Motion Detection Mode
The CCD S820 keychain camera can automatically start recording when it detects motion in its field of view. To use motion detection mode, follow these steps:
Turn on the camera.
Press and hold the video button for about 3 seconds. The blue LED light will flash three times, indicating that motion detection mode has been activated.
The camera will start recording when it senses movement. The blue LED light will flash slowly during recording.
To exit motion detection mode, press any 061ffe29dd